Speedi Sleeve and Tool Kit for 1.125in Shaft, 0.313in Width

SKF's vehicle aftermarket boasts an unmatched product range of over 20,000 variations in exceptional quality. We focus on providing comprehensive system repair products so that you can easily find the parts you need. Through a strong network of more than 10,000 distributors and dealers worldwide, our spare parts for cars, trucks, and two-wheelers reach workshops across the globe.

Our range of products and emphasis on continuous innovation and improvement make us a trusted partner for top vehicle aftermarket distributors. We aim to be your go-to source for all your vehicle maintenance and repair needs.

If you're unsure which product fits your vehicle, you can use the site search function to get product recommendations based on your vehicle information. Alternatively, you can send us a message, and we'll be happy to assist you in finding the right fit.

It's important to note that SKF products are equivalent to OE quality, ensuring a reliable and high-performance solution for your vehicle.

The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shafts. It's quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface, unlike many popular regrinding and refinishing techniques that produce a surface that cannot be properly sealed.

To install an SKF SPEEDI-SLEEVE, follow these steps:

1. Clean the seal counter surface on the shaft and file down any burrs or rough spots.
2. Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft and ensure the mean diameter is within the recommended specifications for the sleeve size.
3. Determine the exact position where the sleeve must be placed to cover the seal wear track.
4. For shallow wear grooves, you can optionally apply a light layer of a non-hardening sealant to the inside diameter surface of the sleeve.
5. If the shaft is deeply scored, fill the groove with a powdered metal epoxy-type filler before installing the sleeve.
6. Insert the flange end of the sleeve onto the shaft first, then place the installation tool over the sleeve.
7. Gently tap the center of the installation tool until the sleeve covers the seal worn surface.
8. If needed, remove the flange by cutting it perpendicular to the tear-off groove and bending it back and forth or twisting it into a coil.
9. Check for any remaining burrs and remove them.
10. Lubricate the sleeve with the system medium before installing the seal.
11. Proceed with the seal installation.

The standard range of SKF SPEEDI-SLEEVE sizes covers shaft diameters from 0.472" to 8" (12 mm to 200 mm). These thin-walled, 0.011" (0.28 mm) stainless steel sleeves are wear-resistant and provide a finish of Ra 10 to 20 μin (0.25 to 0.5 μm), making them an ideal sealing surface. The installation is quick and easy, reducing downtime, and each SPEEDI-SLEEVE comes with a disposable installation tool.

product information: