Premium Speedi Sleeve and Tool Kit, Inch, 6in Shaft Diameter, 1.000in Width

From the brand A, we are a partner for the top vehicle aftermarket distributors, offering a range of products and focusing on continuous innovation and improvement. The SKF vehicle aftermarket boasts a product range of over 20,000 variations in unmatched quality. We focus on providing system repair products with a wide range coverage, ensuring that you don't have to look very far for the parts you need. Through a strong network of more than 10,000 distributors and dealers within the vehicle, our spare parts for cars, trucks and two-wheelers reach their destination at workshops all over the world.

To determine if a product fits your vehicle, please enter your vehicle information into the site search function for product offer suggestion. If you need further assistance, please send us a message, and we can check for you. SKF products are equivalent to OE quality, ensuring a reliable and durable solution.

The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shafts. It's quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface, as many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed.

The standard range of SKF SPEEDI-SLEEVE sizes covers shaft diameters from 0.472" to 8" (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thin-walled, 0.011" (0.28 mm), and made of high-quality stainless steel. The contact surface is wear-resistant with a finish of Ra 10 to 20 μin (0.25 to 0.5 μm). No expensive machining or preparation is required before mounting, reducing downtime as installation only takes a few minutes.

To install an SKF SPEEDI-SLEEVE, follow these steps:

1. Clean the seal counter surface on the shaft and file down any burrs or rough spots.
2. Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft and ensure the mean diameter is within the recommended specifications.
3. Determine where the sleeve must be positioned to cover the seal wear track and measure to the exact point.
4. For shallow wear grooves, a light layer of a non-hardening sealant can be applied to the inside diameter surface of the sleeve. For deeply scored shafts, fill the groove with a powdered metal epoxy type filler.
5. Place the flange end of the sleeve on the shaft first, then the installation tool over the sleeve.
6. Gently tap the center of the installation tool until the sleeve covers the seal worn surface.
7. If needed, remove the flange by cutting along the tear-off groove and bending it back and forth or twisting it into a coil.
8. Check for any remaining burrs and lubricate the sleeve with the system medium before installing the seal.

The SKF SPEEDI-SLEEVE is a cost-effective and efficient solution for refinishing worn shafts, providing a durable sealing surface without the need for extensive machining or preparation.

product information: